YOUR CAR DESERVES BETTER.
Other towels vs BlitzDRY
THE SCIENCE OF A PERFECT DRY.
A standard flat-weave microfiber strand sits roughly 1–2mm off the surface.
The Precision-Dry uses a twisted-loop construction where each fiber spirals upward 4–6× that height - dramatically increasing total surface area per square inch of towel.
The practical result: the towel holds significantly more water before reaching saturation, which means fewer passes, less pressure, and a lower risk of surface contact with trapped particles.
This is the same principle used by professional detailers on six-figure paint jobs.
QUICK ANSWERS
Find answers to common questions
about our products.
Yes - the ultra-soft pile won't scratch, snag, or disrupt any coating or film type, including matte PPF and satin finishes. The split-fiber construction lifts water away from the surface rather than dragging across it, which is why it's safe on even the most sensitive finishes.
Machine wash cold with a gentle, fragrance-free detergent. Tumble dry on low heat. Wash every 2–3 uses to clear accumulated particles from the pile. Never use fabric softener or bleach - both degrade microfiber structure over time and permanently reduce absorbency.
Yes. A traditional chamois absorbs water, but it can also trap grit and drag it across your paint, causing the micro-scratches and swirl marks. Microfiber's split-fiber construction physically lifts and holds particles within the pile, keeping them away from your surface throughout the drying process.
The BlitzDRY Towel holds enough water to comfortably dry a full-size car before it needs wringing. After drying, you can dry 2-3 cars before it needs washing.
